SERVICE CAPACITY HEAVY-UPS
Perched on the north bluff overlooking the valley, Edgewood features spacious residential properties and custom homes. Many built in the 1960s and 1970s still rely on 100-amp service panels. Modernizing with cold-climate heat pumps and EV chargers requires a 200-amp service heavy-up.
Written flat-rate quote before any work starts.
Transparent pricing
Published ranges for Edgewood specifically. Your written quote is confirmed on site before work starts.
| Service | Typical range | What it covers |
|---|---|---|
| 200-Amp Panel Replacement | $2,850 – $4,300 | High-grade copper bus panel with whole-house surge protector |
| Exterior Meter Socket Heavy-Up | $850 – $1,450 | New PSE-approved 200A meter enclosure and weatherhead |
| Dual Grounding Rod System | Included in package | Dual 8-foot copper rods meeting NEC 25-ohm standards |
Ranges reflect typical completed jobs and are published so you can budget before you call. Your written flat-rate quote is confirmed on site, before any work begins.
Edgewood conditions
We modernize undersized panels to provide ample capacity for heat pumps, EV chargers, and backup power.
Edgewood conditions
Specific to this area rather than a generic list — these come from jobs completed on these streets.
Older 100-amp main breakers cannot support the combined load of auxiliary heat strips, water heaters, and electric ranges.
What we do
We upgrade your service to 200-amp copper bus equipment, doubling usable power capacity.
Original panels with defective breaker stabs fail to trip during short circuits, risking hidden wall framing fires.
What we do
We remove defective panels, install modern Square D or Eaton hardware, and certify safety for underwriters.
Suburban acreage properties lack physical breaker slots for Level 2 EV charging stations or outbuilding power.
What we do
A 40-circuit 200A panel provides plenty of dedicated breaker spaces for EV chargers and future additions.
Local detail
High elevation bluff exposure to north winds causes frequent tree limb breaks across overhead lines, knocking out residential power and private well pumps.
Permits and inspection: Permitted through City of Edgewood and inspected under Washington State L&I regulations.
For the full service breakdown including our diagnostic equipment and process, see our electrical panel upgrade page. For everything else we cover locally, see Edgewood, WA.
Finished work
Every circuit breaker is clearly labeled with Type 2 whole-house surge suppression pre-installed.
Average arrival under 45 minutes, with the same rate day or night.
Reviews
Rated 4.9 out of 5 across 184 customer reviews.
Our 1980s breaker panel started buzzing violently during an afternoon windstorm when our heat pump kicked on. Pro Electrician had a truck at our home within 40 minutes, identified loose bus bar connections, and replaced the failing breakers safely.
Living in a 1920s historic craftsman home, our insurance required knob-and-tube mitigation. Their team rewired our attic and living spaces without damaging our lath-and-plaster walls. Clean, courteous, and passed L&I inspection with flying colors.
After repeated winter storm power outages on the plateau, we decided on a Generac standby generator with an automatic transfer switch. The team handled the permits through Bonney Lake seamlessly and completed the installation with outstanding craftsmanship.
Installed a Tesla Wall Connector in our finished two-car garage. They ran conduit neatly along the ceiling joists, installed a 60-amp dedicated breaker, and completed the job in under three hours with zero mess.
Questions
Direct answers to the questions we actually get on these calls.
Yes. We manage the permit filing, coordinate the service disconnect and reconnect with Puget Sound Energy, and arrange final inspection.
Read the full guide arrow_forwardYes. Most residential 200-amp panel upgrades are completed within a single business day with power restored the same afternoon.
Explore
